Sharp AR-BC260 Service Manual page 76

<7> PS motor
1) Remove the rear cabinet, the connection right cabinet, and the
rear right cabinet.
2) Remove the connector and the screw, and remove the pro-
cess exhaust fan unit. Remove the connector and the screw,
and remove the PS motor.
d. Paper exit section
<1> Slide drive motor
1) Open the left cabinet.
2) Remove the FD connection cabinet.
3) Remove the connector and the screw, and remove the motor
unit.
A
4) Remove the connector and the screw, and remove the motor
(A).
AR-BC260 DESCRIPTIONS OF EACH SECTION 7 - 39
<2> FD paper exit unit
1) Remove the rear cabinet, the rear cabinet upper, the left cabi-
net, the rear left cabinet lid, the rear left cabinet, and the front
cabinet upper.
2) Remove the motor unit.
3) Slide section (A) to the front side. Remove the screw, and dis-
engage the pawl in section (B). Remove the FD paper exit unit
(C) from the rear side and remove the connector.
∗ When assembling, attach from the front side.
∗ When assembling, be careful not to damage the actuator
(D).
B
A
D
C
<3> FD paper exit roller B
1) Remove the cabinet.
2) Remove the paper exit unit.
3) Remove the E-ring, the bearing, and the gear. Remove the FD
paper exit roller B.