Sharp AR-BC260 Service Manual page 266

(4-3) Click the "Device manager" and click the "Port (COM/
LPT)," and double-click the "Communication port
(COM*) to be used.
(4-4) Set the bit/sec of port set menu to 38400.
If 38400 cannot be set, set either of the following com-
munication speeds.
9600/19200
In the case of Windows 2000:
(4-1) Open the "Control panel."
(4-2)
Double-click
(4-3)
38400
(4-4)
AR-BC260 ROM VERSION UP 12 - 11
Open the "System."
Open the "Device manager" on the hardware menu.
Click the "Port (COM/LPT)", and double-click the
"Communication port (COM*)" to be used.
Double-click