Default-Vlan Disable; Name - Dell S4810 Reference Manual

default-vlan disable

Disable the default VLAN so that all switchports are placed in the Null VLAN until they are explicitly
configured as a member of another VLAN.
S4810
Defaults Enabled.
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 8.3.1.0
Usage The no default vlan disable command is not listed in the running-
Information
configuration, but when the default VLAN is disabled, default-vlan disable is
listed in the running-configuration.

name

Assign a name to the VLAN.
S4810
Syntax
name vlan-name
To remove the name from the VLAN, use the no name command.
Parameters
vlan-name
Defaults Not configured.
Command INTERFACE VLAN
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
1058
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced
Enter up to 32 characters as the name of the VLAN.
Layer 2