Dell S4810 Reference Manual page 1469

password
Defaults No password is configured.
Command LINE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
Usage Dell Networking OS prompts users for these passwords when the method for
Information authentication or authorization used is "line".
Related
enable password
Commands
login authentication
switch.
service password-encryption
Networking OS .
radius-server key
switch and the RADIUS host server.
tacacs-server key
server and client.
username
Security
Enter a text string up to 32 characters long. The first
character of the password must be a letter. You cannot use
spaces in the password.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— sets the password for the enable command.
— configures an authentication method to log in to the
— encrypts all passwords configured in Dell
— configures a key for all RADIUS communications between the
— configures a key for communication between a TACACS+
— establishes an authentication system based on user names.
1469