Login Authentication - Dell S4810 Reference Manual

The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
Usage
To control access to command modes, use this command to define a password for
Information
a level and use the privilege level (CONFIGURATION mode) command.
Passwords must meet the following criteria:
•
•
Related
show running-config
Commands
privilege level (CONFIGURATION mode)
modes within the switch.

login authentication

To designate the terminal lines, apply an authentication method list.
S4810
Syntax
login authentication {method-list-name | default}
To use the local user/password database for login authentication, use the no
login authentication command.
Parameters
method-list-
name
Security
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Start with a letter, not a number.
Passwords can have a regular expression as the password. To create a
password with a regular expression in it, use CNTL + v prior to entering regular
expression. For example, to create the password abcd]e, you type "abcd CNTL
v ]e". When the password is created, you do not use the CNTL + v key
combination and enter "abcd]e".
NOTE: The question mark (?) and the tilde (~) are not supported characters.
— views the current configuration.
Enter the keywords method-list-name to specify that
method list, created in the aaa authentication login
command, to be applied to the designated terminal line.
— controls access to the command
1467