Defaults
none
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Example
Dell#show qos class-map
Class-map match-any CM
Related
class-map
Commands
show qos dot1p-queue-mapping
Displays the dot1p priority to queue mapping on the switch.
S4810
Syntax
show qos dot1p-queue-mapping
Defaults
•
•
Command
EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
1370
EXEC
EXEC Privilege
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Match ip access-group ACL
— identifies the class map.
dot1p Priority: 0 1 2 3 4 5 6 7
Queue: 2 0 1 3 4 5 6 7
Introduced on the S6000.
Introduced on the S4820T.
Quality of Service (QoS)