Dell S4810 Reference Manual page 1479

Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
radius-server group
Creates or deletes a group of radius servers.
S4810
Syntax
radius-server group group-name
Parameters
group-name
Defaults Not configured.
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.4.
(0.0)
Example
FTOS(conf)#radius-server group group1
FTOS(conf-radius-group)#radius-server host 1.1.1.1 key secret
FTOS(conf-radius-group)#radius-server host 2.2.2.2 key secret
FTOS(conf-radius-group)#radius-server vrf vrf1 source-
interface tengigabitethernet 0/36
FTOS(conf-radius-group)#show config
!
radius-server group group1
radius-server vrf vrf1 source-interface TenGigabitEthernet
0/36
radius-server host 1.1.1.1 key 7 9a2f3ec0c65c6f41
radius-server host 2.2.2.2 key 7 9a2f3ec0c65c6f41
FTOS(conf-radius-group)#
Security
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Enter the group name that denotes the group of RADIUS
servers.
Introduced on the S-Series and Z-Series.
1479