Aaa Authorization Commands - Dell S4810 Reference Manual

aaa authorization commands

Set parameters that restrict (or permit) a user's access to EXEC and CONFIGURATION level commands.
S4810
Syntax
aaa authorization commands level {name | default} {local ||
tacacs+ || none}
Undo a configuration with the no aaa authorization commands level
{name | default} {local || tacacs+ || none} command.
Parameters
commands
level
name
default
local
tacacs+
none
Defaults none
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
Version 6.1.1.0
Security
Enter the keyword commands then the command privilege
level for command level authorization.
Define a name for the list of authorization methods.
Define the default list of authorization methods.
Use the authorization parameters on the system to perform
authorization.
Use the TACACS+ protocol to perform authorization.
Enter the keyword none to apply no authorization.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Added support for RADIUS.
1455