Show Vlt Private-Vlan - Dell S4810 Reference Manual

show vlt private-vlan

Display the association of private VLAN (PVLAN) with the VLT LAG. You can configure VLT peer nodes in a
PVLAN on the S4810 platforms.
Syntax
show vlt private-vlan
Command EXEC
Modes
Command
Version 9.4(0.0)
History
Version 9.3(0.0)
Usage If you add an ICL or VLTi link as a member of a primary VLAN, the ICL becomes a
Information part of the primary VLAN and its associated secondary VLANs, similar to the
behavior for normal trunk ports. VLAN symmetricity is not validated if you associate
an ICL to a PVLAN. Similarly, if you dissociate an ICL from a PVLAN, although the
PVLAN symmetrictiy exists, ICL is removed from that PVLAN in such a case. The ICL
Status field denotes the type of the VLAN port of the VLTi link configured in a
PVLAN.
Example
Dell#Show vlt private-vlan vlan-id
Codes: C- Community, I – Isolated, V – Internally tagged, T –
tagged, * - VLT Pvlan
Primary
10
40
Dell#
1738
Introduced on the S6000 platform.
Introduced on the Z9000, S4810, and S4820T platforms.
Secondary ICL Status
V (*)
20(C) V
30 (I) V
T
50(C) T
60 (I) T
Virtual Link Trunking (VLT)