Coolant Pump Inside Crankcase Oil Seal Replacement; Coolant Pump Control Rear Oil Seal Disassembly; Coolant Pump Control Shaft Check; Coolant Pump Control Rear Oil Seal Assembly - Husqvarna TC 449 2011 I.E. Workshop Manual

H01942
H01943
H01943
ENGINE DISASSEMBLY/REASSEMBLY
TC 449 2011/2012 I.E.
TE 449 - 511 2011/2012 I.E.
TXC 449 - 511 2011/2012 I.E.
SMR 449 2011 I.E.
SMR 511 2011/2012 I.E.
COOLANT PUMP INSIDE CRANKCASE OIL SEAL REPLACEMENT (CRAN-
KCASE COVER REMOVED)

Coolant pump control rear oil seal disassembly

• Remove oil seal (1).

Coolant pump control shaft check

Check
Result: Damaged or worn shaft
Action:
Replace coolant pump drive (crankcase cover removed)

Coolant pump control rear oil seal assembly

• Clean oil seal seat.
• Fit oil seal (1) using a suitable tool.
F1.39
Workshop Manual Ed. 03-2012