Epson DFX 9000
4.2.2.4 OP UNIT
1. Open the TOP COVER, and release the three tabs on the inside top
edge of the OP UNIT by pressing them from inside the UPPER
UNIT. Gently pull the OP UNIT out toward you to gain access to the
OP CABLE.
2. Disconnect the OP CABLE from the connector on the back of the
OP UNIT, and then remove the OP UNIT.
TOP COVER
Figure 4-6. OP UNIT Removal
Disassembly and Assembly
Tabs
1)-2
OP CABLE
2)-1
1)-1
2)-2
OP UNIT
OP UNIT
Revision B
134