Paper Specifications - Epson DFX-9000 Service Manual

Epson DFX-9000

1.2.6 Paper specifications

1.2.6.1 Continuous paper (single sheet)
Table 1-7. Continuous form, single sheet paper specifications, front
or rear paper path
Tractor
Item
Min.
Width mm 76.2
inch 3
Length (one mm 76.2
page)
inch 3
Total thickness mm 0.065
inch 0.0025
Weight (single g/m 2 52
sheet)
lb 14
Notes: 1. Punch-hole diameter should be less than 5 mm.
2. When using pre-printed paper, the reflectivity of the pre-
printed color should be less than 60% (e.g., black). The
shaded area should not be pre-printed as shown in
Pre-printed paper (continuous Forms)
should not have punch holes.
Quality
Plain or recycled paper
Not curled, folded, nor crumpled
Fastening
Point glue or paper staple (both sides)
Product Description
Tractor + Cutter
Max. Min. Max.
419.1 101.6 406.4
16.5 4 16
558.8 101.6 431.8
22 4 17
0.1 0.065 0.1
0.0039 0.0025 0.0039
82 52 82
22 14 22
Figure 1-9.
(p.16), and that area
Basic specifications
1.2.6.2 Continuous paper (multipart)
Table 1-8. Multipart paper specifications, rear paper path
Tractor only
Item
Min.
Width mm 76.2
inch 3
Length mm 76.2
(one page)
inch 3
Copies 1 original +
6 copies
Total thickness mm 0.12
inch 0.0047
Weight g/m 2 41
(one sheet of
lb 11
multipart form)
Revision B
Tractor and Cutter
Max. Min. Max.
419.1 101.6 406.4
16.5 4 16
558.8 101.6 431.8
22 4 17
1 original +
6 copies
0.53 0.12 0.53
0.021 0.0047 0.021
56 41 56
15 11 15
13