Epson DFX-9000 Service Manual page 207

Epson DFX 9000
3. Remove the E-rings on both ends of the Nip roller ASY.
4. Slide the Nip roller ASY to the left to clear the right-end of the shaft
from the shaft hole, and then pull the left-end of the shaft from the
shaft hole to remove the Nip roller ASY.
5. Release the two tabs that secure Nip roller F, and slide Nip roller F
off of Nip roller shaft F.
6. Slide the PJS ROLLER off of Nip roller shaft F.
Disassembly and Assembly
PJS ROLLER
[Front]
Nip Roller ASY
Right
Side
3)
E-ring
Figure 4-84. PJS ROLLER Removal (2)
Sensors
5)-1
Nip Roller F
5)-1
Nip roller F
6) 5)-2
Nip Roller Shaft F
4)
3)
Revision B
Left Side
E-ring
200