Epson DFX-9000 Service Manual page 162

Epson DFX 9000
Ribbon MASK
1. Remove the PRINT HEAD (p. 152)
2. Slowly bow toward you the left end of the Ribbon MASK as shown
in Figure 4-29. Release the Mask from the guide slot and pin that
secure the MASK to the left side of the CARD GUIDE ASY.
3. Release the MASK from the right guide slot and pin, and remove the
ribbon MASK.
Install the MASK as shown in
down into the guide slots on both sides until the pins lock it
in place.
Figure 4-29. MASK removal
Disassembly and Assembly
Figure 4-30 by sliding it
2)-1
MASK
Guide
slot
2)-2
CARRIER UNIT
Pins
3)
CARD GUIDE ASY
Guide slot
Pins
Figure 4-30. MASK installation
Revision B
155