Epson DFX-9000 Service Manual page 188

Epson DFX 9000
8. Remove the C.B.S. 3 × 6 screw that secures the OC SENSOR BR
UNIT, and remove the OC SENSOR BR UNIT. See
BR UNIT (p. 204).
When removing the OC SENSOR BR UNIT, be careful
C A U T I O N
not to interfere with the tabs on the bottom of the OC slide
cam L that pass through the photo sensor.
9. Remove the E-ring that secures the left end of the DV ROLLER F
ASY, and remove the DV gear.
10. Remove the Nip gear from the Nip roller shaft.
11. Remove the OC slide cam L, and remove the Bearing RL from the
DV ROLLER R ASY.
Disassembly and Assembly
OC SENSOR
11)-1
OC slide cam L
9)-1
E-ring
DV ROLLER UNIT
8)
11)-2
Bearing RL OC SENSOR BR UNIT
9)-2
DV gear
Nip gear
10)
DV ROLLER F ASY
Figure 4-61. DV ROLLER R ASY Removal (2)
Revision B
DV ROLLER R ASY
Nip roller shaft
181