Epson DFX-9000 Service Manual page 200

Epson DFX 9000
CARRIER UNIT
11. Release all the cables from the two cable clamps on the SIDE
FRAME, LEFT.
12. Remove the C.B.S. 3 × 6 screw that secures the CR cable cover, and
remove the CR cable cover.
13. Release the six tabs that secure the Cable cover to the frame, and
remove the Cable cover.
14. Slide the Cable holder in the direction of the arrow to remove it.
Disassembly and Assembly
Cable clamp
CARRIER CABLE UNIT
Cable cover
Figure 4-77. CARRIER UNIT Removal (1)
CARRIER UNIT
12)-1
12)-2
6 Tabs
CR cable cover
13)
Cable holder
CARRIER CABLE UNIT
14)
Revision B
Cable clamp
193