Epson DFX-9000 Service Manual page 159

Epson DFX 9000
4.2.4.2 PRINT HEAD
Do not touch the PRINT HEAD immediately after using
W A R N I N G
the printer, or you may burn your hand. Allow the head to
cool enough to work with it.
1. Open the TOP COVER of the UPPER UNIT.
2. Remove the two C.P. (S-P1) 4 × 12 screws that secure the PRINT
HEAD to the CARRIER UNIT.
3. Slide the PRINT HEAD toward you to disengage the two
positioning pins, then lift the PRINT HEAD straight up slowly to
remove it while disconnecting it from the connector on the
CARRIER UNIT.
Disassembly and Assembly
PRINTHEAD
2)
2)
Figure 4-25. PRINT HEAD Removal
PRINT HEAD
Positioning pin insertion
positions
3)-2
3)-1
CARRIER UNIT
Revision B
Connector
152