Epson DFX-9000 Service Manual page 209

Epson DFX 9000
6. Release the TPE sensor cable from the retaining tab on the Upper
guide R unit.
7. Release the catch on the TPE HOLDER ASY, and tilt the TPE
HOLDER ASY toward you. Pull the TPE sensor cable out from
behind the Paper eject roller, and remove the TPE HOLDER ASY.
Align the TPE HOLDER ASY with the cutout on the
Upper guide R unit as shown in the lower-right photo in
Figure 4-86.
Disassembly and Assembly
TPE sensor
6)
Cable
Tab
Paper Eject Roller
Upper guide R unit
Figure 4-86. TPE HOLDER ASY Removal (2)
Sensors
Revision B
7)-3
TPE HOLDER ASY
7)-1
7)-2
Reassembly
Cutout
202