Epson DFX-9000 Service Manual page 214

Epson DFX 9000
You need to support the Back Stay during the next step to
C A U T I O N
prevent it from dropping off.
7. Remove the four C.B.S. 3 × 6 screws that secure the Back stay ASY,
and remove the Back stay ASY.
When installing the Back stay ASY, match the positioning
holes of the Back stay ASY with the guide pins.
8. Release the two tabs that secure the PTRM SWITCH ASY, and
remove it.
Disassembly and Assembly
8)-2
8)-1
7)-1
7)-1
Figure 4-91. PTRM SWITCH ASY Removal (2)
Sensors
PTRM SWITCH ASY
8)-1
7)-2 7)-2
Back Stay ASY
Revision B
7)-1
7)-1
207