Epson DFX-9000 Service Manual page 183

Epson DFX 9000
8. Remove the C.B.S. 3 × 6 screw that secures the OC SENSOR BR
UNIT, and remove the OC SENSOR UNIT.
UNIT (p. 204))
When removing the OC SENSOR BR UNIT, be careful
C A U T I O N
not to interfere with the tabs on the bottom of the OC slide
cam L that pass through the photo sensor.
9. Remove the E-ring that secures the left end of the DV ROLLER F
ASY, and remove the DV gear.
10. Remove the Nip gear from the Nip roller shaft.
11. Remove the OC slide cam L, and remove the OC cam from the DV
ROLLER F ASY.
12. Remove the E-ring that secures Bearing FL to the Nip roller shaft,
and remove Bearing FL.
Disassembly and Assembly
(OC SENSOR BR
DV ROLLER UNIT
11)-2
OC cam
OC SENSOR BR UNIT
11)-1
OC slide cam L
9)-2
DV gear
9)-1
E-ring
Nip gear
10)
E-ring
12)-1
Bearing FL
12)-2
Figure 4-55. DV ROLLER F ASY Removal (2)
Revision B
8)
Nip roller shaft
DV ROLLER F ASY
176