Epson DFX-9000 Service Manual page 33

Epson DFX-9000
Table 1-20. Connector pin assignment, forward channel (continued)
Signal Return
Pin No.
name GND Pin
11 BUSY 29
12 PE 28
13 SLCT 28
14 -AFXT 30
31 -INIT 30
32 -ERROR 29
36 -SLIN 30
18 Logic H -
35 +5 V -
17 Chassis -
16, 33 GND -
19-30
15, 34 NC -
* In/Out denotes the signal flow direction from the printer.
Product Description
In/Out* Function description
Out This signal, when high, means that the printer is not ready to accept data.
Out This signal, when high, means that the printer has a paper-out error.
Out Always high (active) when the printer is powered on.
In Not used.
In This signal's negative pulse initializes the printer.
Out This signal is low when the printer has error.
In Not used.
Out This line is pulled up to +5 V through a 3.9 kΩ resistor.
Out This line is pulled up to +5 V through a 1.0 kΩ resistor.
- Chassis GND
- Signal GND
- Not connected.
Basic specifications
Revision B
26