Ui Automation; Les Applications; Key Repeat Initial Delay; Key Repeat Rate - Lexmark X746de Service Manual

7526
To set Require Standby:
1. Touch Require Standby from the Configuration Menu.
Touch the
2.
Touch Submit.
3.
Submitting changes... is displayed.
You are automatically returned to the Configuration menu.

UI Automation

This setting allows external developers to measure the stability of their applications by performing their own
automated testing against the device.
Selections include Enable and Disable (default).
When Enable is selected, the machine creates a file called ENABLE_UI_AUTOMATION in the /var/fs/shared/
directory. As long as this file exists, the device permits automated testing by external users.
When Disable is selected, the machine removes the ENABLE_UI_AUTOMATION file from the /var/fs/shared/
directory and prohibits automated testing.

LES Applications

Enables or disables Lexmark Embedded Solutions (LES) applications. The default is Enable.
To change the setting:
1. Touch LES Applications from the Configuration Menu.
Touch the
2.
Touch Submit.
3.
Submitting changes... is displayed.
You are automatically returned to the Configuration menu.

Key Repeat Initial Delay

Determines the initial length of delay before a repeating key starts repeating. The range is from 0.25 seconds to
5 seconds in 0.25 second increments. The default value is 1 second.
To set the delay:
Touch Key Repeat Initial Delay from the Configuration Menu.
1.
Touch the
2.
3. Touch Submit.
Submitting changes... is displayed.
You are automatically returned to the Configuration menu.

Key Repeat Rate

Number of presses per second for a repeating key. The range is from 1 to 100 presses per second. The default
is 15 presses per second.
To set the number of key presses per second:
Touch Key Repeat Rate from the Configuration Menu.
1.
2. Touch the
Touch Submit.
3.
Service Manual
3-44
or arrow to toggle between On and Off.
or arrow to toggle between Enable and Disable.
or arrow to change the value 0.25 second to 5 seconds.
or arrow to change the value from 1 to 100.
Previous
Next
Go Back