Table of Contents
Advertisement
ERROR CODE LIST
Classification Abnormality
code
FS
F77-03
abnor-
mality
F77-04
F77-05
F77-06
F77-07
F77-08
F77-11
F77-12
F77-13
2
KONICA MINOLTA 8050/CF5001/C500/8150 Field Service Ver.3.0 Dec. 2004
Causes
After the alignment motor /U
(M705) was turned ON, the
alignment HP sensor /U
(PS708) is not turned ON or
OFF within the specified time.
After the paper exit roller motor
(M707) was turned ON, speed
does not reach the specified
level within the specified time.
After the paper exit motor
(M708) is turned ON, paper
exit opening HP sensor
(PS712) is not turned ON or
OFF within the specified time.
After the stapler moving motor
(M711) is turned ON, stapler
moving HP sensor (PS711) is
not turned ON or OFF within
the specified time.
After the clincher rotating motor
(M704) is turned ON, clincher
rotating HP sensor (PS714) is
not turned ON or OFF within
the specified time.
After the stapler rotating motor
(M706) is turned ON, stapler
rotating HP sensor (PS713) is
not turned ON or OFF within
the specified time.
After the stapler motor /F
(M714) is turned ON, stapler
HP sensor /F (PS731) is not
turned ON within the specified
time.
After the stapler motor /R
(M709) is turned ON, stapler
HP sensor /R (PS730) is not
turned ON within the specified
time.
After the clincher motor /F
(M715) is turned ON, clincher
HP sensor /F (PS733) is not
turned ON within the specified
time.
5-24
Resulting
Estimated abnormal parts
operation
Main body and
FNS control board (FNSCB)
FNS stop
Alignment motor /U (M705)
operation
Alignment HP sensor /U
immediately
(PS708)
and main relay
(RL1) is
FNS control board (FNSCB)
turned OFF.
Paper exit roller motor (M707)
FNS control board (FNSCB)
Paper exit opening motor
(M708)
Paper exit opening sensor
(PS712)
FNS control board (FNSCB)
Stapler movement motor (M711)
Stapler movement HP sensor (PS711)
FNS control board (FNSCB)
Clincher rotation motor (M704)
Clincher rotation HP sensor (PS714)
FNS control board (FNSCB)
Stapler rotation motor (M706)
Stapler rotation HP sensor (PS713)
FNS control board (FNSCB)
Stapler motor /F (M714)
Stapler HP sensor /F (PS731)
FNS control board (FNSCB)
Stapler motor /R (M709)
Stapler HP sensor /R (PS730)
FNS control board (FNSCB)
Clincher motor /F (M715)
Clincher HP sensor /F (PS733)
Advertisement
Table of Contents
