Konica Minolta 8050 Service Manual page 297

KONICA MINOLTA 8050/CF5001/C500/8150 Field Service Ver.3.0 Dec. 2004
Classifi- Jam
cation code
Paper J17-05
feed
J17-06
J17-07
J17-08
J17-09
LT-211 J17-10
C-208
Paper J17-11
feed
J17-12
J17-13
J17-14
LT-211 J17-15
C-208
Causes
After the intermediate conveyance
clutch /1 (MC13) is turned ON, interme-
diate conveyance sensor /1 (PS27) is
not turned ON within the specified time.
After the pre-registration clutch /1
(MC7) is turned ON, intermediate con-
veyance sensor /1 (PS27) is not turned
ON within the specified time.
After the pre-registration clutch
(MC102) is turned ON, intermediate
conveyance sensor /1 (PS27) is not
turned ON within the specified time.
After the intermediate conveyance sen-
sor /1 (PS27) is turned ON, intermedi-
ate conveyance sensor /2 (PS28) is not
turned ON within specified time.
After the bypass feed conveyance sen-
sor (PS26) is turned ON, the intermedi-
ate conveyance sensor /2 (PS28) is not
turned ON within the specified time.
After the pre-registration clutch
(MC102) is turned ON, paper feed sen-
sor (PS107) is not turned ON within the
specified time.
Vertical conveyance sensor (PS50)
was turned ON in the idling condition.
Intermediate conveyance sensor /1
(PS27) was turned ON in the idling con-
dition.
Intermediate conveyance sensor /2
(PS28) was turned ON in the idling con-
dition.
Registration sensor (OS22) was turned
in the idling condition.
Paper feed sensor (PS107) was turned
ON in the idling condition.
Resulting
operation
If copy is pro-
gressing when
jam arises, main
body stops after
completion of
paper exit.
—
4-3
JAM CODE LIST
Correction
Open the vertical con-
veyance door and
remove jammed paper,
if any.
Open the LCT front
door and remove
jammed paper, if any.
Pull out ADU and
remove jammed paper,
if any.
Remove paper from
the bypass feed tray
and remove jammed
paper, if any.
Open the LCT top
cover and remove
jammed paper, if any.
Open the vertical con-
veyance door and
remove jammed paper,
if any.
Pull out ADU and
remove jammed paper,
if any.
Open the LCT front
door and remove
jammed paper, if any.
2