Table of Contents
Advertisement
JAM CODE LIST
Classifi-
Jam
cation
code
Others
J19-01
Others
J19-02
LT-211
C-208
Paper
J31-02
exit
J32-01
J32-02
J32-03
J32-04
J32-05
J32-07
J32-08
2
KONICA MINOLTA 8050/CF5001/C500/8150 Field Service Ver.3.0 Dec. 2004
Causes
Vertical conveyance door open jam.
Vertical conveyance door sensor
(PS51) was turned OFF when copying /
printing.
LCT top cover open jam or LCT front
door open jam. Top cover open/close
sensor (PS100) or front door open/
close sensor (PS115) was turned OFF
when copying/printing.
After the registration roller motor (M30)
is turned ON, fixing paper exit sensor
(PS17) is not turned ON.
After the fixing paper exit sensor
(PS17) is turned ON, paper exit sensor
(PS13) is not turned ON within the
specified time.
After the fixing paper exit sensor
(PS17) is turned ON, reverse paper exit
sensor (PS19) is not turned ON within
the specified time.
In the reverse paper exit mode, after
the reverse paper exit sensor (PS19) is
turned ON, paper exit sensor (PS13) is
not turned ON within the specified time.
After the fixing paper exit sensor
(PS17) is turned ON, it is not turned
OFF within the specified time.
After the paper exit sensor (PS13) is
turned ON, it is not turned OFF within
the specified time (in straight paper exit
mode).
After the paper exit sensor (PS13) is
turned ON, it is not turned OFF within
the specified time (in reverse paper exit
mode).
When the registration roller motor
(M30) is ON, fixing paper exit sensor
(PS17) is ON.
Resulting
operation
If copy is pro-
gressing when
jam arises, main
body stops after
completion of
paper exit.
In case of LCT
paper feed, main
body stops after
completion of
paper exit. In
case of paper
feed other than
LCT, main body
does not stop.
Printer section
stops immedi-
ately.
4-4
Correction
Close the vertical con-
veyance door.
Close the LCT top
cover or LCT front
door.
Pull out ADU and
remove jammed paper,
if any.
Advertisement
Table of Contents
