Table of Contents
Advertisement
36 MODE
5. "RADF centring adjustment (Front) screen"
For the RADF centering adjustment, the follow-
ing items are provided. Press the [NEXT
ADJUSTMENT] key or [PREVIOUS ADJUST-
MENT] key to select an item you want to
adjust.
• "RADF centring adjustment (Front)"
• "RADF centring adjustment (Back)"
Press the [COPY SCREEN] key.
6. Select the A3 or 11 x 17 paper and press the
START button with a test chart set to the origi-
nal glass.
7. Fold the outputted paper in the paper feed
direction and check the amount of error of the
lines on both sides.
• Standard value: Within ± 2 mm
8. When the value is not within the standard,
press the C button while pressing the P button.
9. Enter a numeric value through the numeric
keys and press the [SET] key.
• Setting range: -30 to +30, 1 step = 0.1 mm
10. Repeat steps 6 to 9 until the standard value is
obtained.
11. Press the [PREVIOUS SCREEN] key to return
to the "Centring adjustment mode menu
screen."
2
KONICA MINOLTA 8050/CF5001/C500/8150 Field Service Ver.3.0 Dec. 2004
7.3.5 Non-image area erase check
When installing this machine or when moving the
installation site, check to see if the erasure function
on the outside of the original of the copy-applied
functions operates correctly at this installation site.
Preparations made in advance:
• Open fully the RADF or platen cover.
• There should not be anything on the original
glass.
• Clean the original glass.
A.
Procedure
1. Enter the 36 mode.
2. "36 mode menu screen"
Press the [2. Image adjustment] key.
3. "Image adjustment mode menu screen"
Press the [5. Non-image area erase check]
key.
4. "Non-image area erase check screen"
Press the [Start] key.
5. Make sure that a message "Normal adjustment
selected..." is shown on the operation panel.
When a message "Does not function satisfac-
torily..." is shown, refer to "B. Error message
and Handling," to conduct the non-image area
erase check again.
6. Press the [PREVIOUS SCREEN] key to return
to the "Image adjustment menu screen."
1-80
Advertisement
Table of Contents
