Table of Contents
Advertisement
36 MODE
9. When a tone jump is found in them, press the
C button while pressing the P button.
10. "Printer screen gradation adj."
Press the [NEXT ADJUSTMENT] key or [PRE-
VIOUS ADJUSTMENT] key to select a color in
which a tone jump has occurred.
11. Enter one less numeric value than the current
and press the [SET] key.
• Setting range: -3 to +1
12. Repeat steps 6 to 11 until the tone jump disap-
pears.
13. Press the [PREVIOUS SCREEN] key to return
to the "Printer gamma adjustment menu
screen."
KONICA MINOLTA 8050/CF5001/C500/8150 Field Service Ver.3.0 Dec. 2004
7.4.3 Sharpness adjustment
Conduct the sharpness adjustment or, this is carried
out when moire reproduced.
Use this adjustment for changing the center value
for the sharpness adjustment in the user mode.
A. Procedure
1. Enter the 36 mode.
2. "36 mode menu screen"
Press the [3. Image quality adjustment] key.
3. "Image quality mode menu screen"
Press the [3. Sharpness adjustment] key.
4. "Sharpness adjustment menu screen"
Press the [COPY SCREEN] key.
5. Select the A3 or 11 x 17 paper and press the
START button with a test chart set to the origi-
nal glass.
6. Press the C button while pressing the P button.
7. Enter a numeric value through the numeric
keys as necessary, and press the [SET] key.
• Setting range: -5 (soft/less moire) to +5 (sharp/
more moire)
8. Repeat steps 4 to 7 until it becomes suitable.
9. Press the [PREVIOUS SCREEN] key to return
to the "Image quality mode menu screen."
1-88
Advertisement
Table of Contents
