Konica Minolta 8050 Service Manual page 299

KONICA MINOLTA 8050/CF5001/C500/8150 Field Service Ver.3.0 Dec. 2004
Classifi- Jam
cation code
Paper J32-11
exit
J32-12
J32-13
Others J51-01
DF-319 J61-01
AFR-20
J61-02
J61-03
J62-01
J62-02
J62-03
J62-04
J62-05
J62-06
Causes
Paper exit sensor (PS13) is ON in the
idling condition.
Fixing paper exit sensor (PS17) is
turned ON in the idling condition.
Reverse paper exit sensor (PS19) is
ON in the idling condition.
Front door open jam. Front door open/
close sensor (PS18) was turned OFF
while copying/printing.
Paper feed section cover open jam.
Paper feed cover sensor (PS303) was
turned OFF when copying.
Paper feed tray open jam. Tray open/
close sensor (PS308) was turned OFF
when copying.
Paper exit section cover open jam.
Paper exit cover sensor (PS307) was
turned OFF when copying.
Registration sensor (PS301) is not
turned OFF within specified time after
paper feed is started.
After reversal of paper feed motor
(M301) is started, timing sensor
(PS302) is not turned ON within the
specified time.
After the timing sensor (PS302) is
turned ON, it is not turned OFF within
the specified time.
After the reverse/paper exit motor
(M303) is turned ON, reverse sensor
(PS305) is not turned ON within the
specified time.
After the reverse sensor (PS305) is
turned ON, it is not turned OFF within
the specified time.
In the one-sided original exit mode,
paper exit sensor (PS306) is not turned
ON within the specified time after the
start of paper exit.
In the double-sided original exit mode,
original exit sensor (PS306) is not
turned ON within the specified time
after the reverse sensor (PS305) is
turned ON.
Resulting
operation
—
Printer section
stops immedi-
ately.
RADF stops
immediately.
If there is paper
in or after trans-
fer process,
main body stops
after paper exit.
4-5
JAM CODE LIST
Correction
Pull out ADU and
remove jammed paper,
if any.
Close the front door.
Close the paper feed
section cover.
Close the paper feed
tray.
Close the paper exit
section cover.
Open the paper feed
section cover and
remove jammed paper,
if any.
Remove jammed paper
in the main body con-
veyance section, if any.
Open the paper exit
section cover and
remove jammed paper,
if any.
Remove jammed paper
in the main body con-
veyance section, if any.
2