About Abnormal Unit Isolation - Konica Minolta 8050 Service Manual

KONICA MINOLTA 8050/CF5001/C500/8150 Field Service Ver.3.0 Dec. 2004

2. ABOUT ABNORMAL UNIT ISOLATION

In the event of following abnormalities, the failed unit can be isolated so that other functions may be tem-
porarily operated.
If any abnormality code is issued, press the Auto Reset key and turn OFF and ON the SW2 (sub power
switch). The unit subjected to abnormality is isolated in the software system and other functions can be
operated. If SW2 is turned OFF or ON without correcting the faulty unit, the abnormality is detected and
the abnormality code is indicated again (a function effective only one time).
Error code
18-01 Error in paper feed tray /1 up
18-02 Error in paper feed tray /2 up
18-03 Error in paper feed tray /3 up
18-05 Error in LT tray up
13-02 LT paper feed motor abnormality
46-40 to 43 HDD abnormality
77-22, 25, 26 Folding drive abnormality
77-31, 37 Cutting drive abnormality
77-41, 42, 43 CF tray drive abnormality
77-44, 47, 55 Punch rocking motor abnormality
Error Unit to be cut off
Paper feed tray /1
Paper feed tray /2
Paper feed tray /3
LT tray
HDD
Folding machine
TU-109, TMG-3
PI-110
PK-120, PK-5,
PK-507
5-29
ABOUT ABNORMAL UNIT ISOLATION
Remarks
Tray can not be selected.
Tray can not be selected.
Tray can not be selected.
Tray can not be selected.
HDD can not be used.
Folding mode, stitch-and-
fold mode, and cutting
mode can not be selected.
Cover sheet mode can not
be selected.
Punch mode can not be
selected.
2