Table of Contents
Advertisement
KONICA MINOLTA 8050/CF5001/C500/8150 Field Service Ver.3.0 Dec. 2004
E-Mail reception setting page
2. Set the e-mail reception screen based on the following.
Enable E-mail notification
Interval between fetching mails
Receiving mail server
Kind of mail spool
User name on the server *1
Password *2
E-Mail Address of this copy
machine
Nickname *3
CE Password *2
Also Notice to the administrator (CC mail)
- No
- Only illegal mails
- All mails
Select [Yes] to use Mail remote notification system.
Default is [No].
Interval between checking mail on receiving mail server from
copier. The interval can be set within the range from 1 min. to 60
min.
Usually, set around 10 min. considering load for network.
The IP address of receiving mail server.
Select [POP3] or [IMAP]. Default is [POP3].
The account name for copier assigned on receiving mail server.
The password for the above user name.
E-mail address of the copier.
Usually, the name is [User name@receiving mail server name].
The name added to the mail subject sent from the copier.
It can be blank.
Input password used for the "Subject" of the mail sent to the copier.
The copier uses this password for security check.
Default (Do not send the e-mail to the administrator)
Specify whether to transfer mail in following conditions; When the
mail received by copier does not match to the registered password
or the mail size is 10 k-byte or larger.
Transfer all sending mails from Mail remote notification system.
2-37
MAIL REMOTE NOTIFICATION SYSTEM
Advertisement
Table of Contents
