Table of Contents
Advertisement
KONICA MINOLTA 8050/CF5001/C500/8150 Field Service Ver.3.0 Dec. 2004
6.14 Setting date input
Set the starting date of the total counter that is dis-
played on the LCD in the P function.
A. Procedure
1. Enter the 25 mode.
2. "25 mode menu screen"
Press the [12.Setting date input] key.
3. "Setting date input screen"
Enter an installation date through the numeric
keys.
4. Press the [OK] key to update the data.
5. To invalidate the setting that you have
changed, press the [CANCEL] key.
6.15 Board change mode
When changing any of the following four types of
boards, be sure to set the serial number of the main
body in this setting.
• OPERATION (operation board /1)
• OVERALL CB (overall control board)
• NVRAM (memory board)
• PRINTER (printer control board)
Note:
• The number of boards that can be replaced at
the same time is restricted only to two boards.
A. Procedure
1. Enter the 25 mode.
2. "25 mode menu screen"
Press the [13. Board change mode] key.
3. "Board change mode screen"
Select a key of the board that you have
replaced a part.
4. "Serial number input screen"
Enter the serial number of the main body
through the alphanumeric keys.
5. Press the [OK] key to update the data.
To invalidate the setting that you have
changed, press the [CANCEL] key.
1-51
25 MODE
Advertisement
Table of Contents
