Stitch And Fold Stopper Adjustment (Fs-215/Fn-9/Fs-606 Only); Fold Stopper Adjustment (Fs-215/Fn-9/Fs-606 Only) - Konica Minolta 8050 Service Manual

KONICA MINOLTA 8050/CF5001/C500/8150 Field Service Ver.3.0 Dec. 2004
7.8.1 Stitch and fold stopper adjustment (FS-
215/FN-9/FS-606 only)
Adjusting the stapling position when stitch and fold
mode.
A. Procedure
1. Enter the 36 mode.
2. "36 mode menu screen"
Press the [7. Finisher adjustment] key.
3. "Finisher adjustment mode menu screen"
Press the [1. Stitch and Fold stopper adj.] key.
4. "Stitch and Fold stopper adj. (A3) screen"
Press the [COPY SCREEN] key.
5. Set paper in the tray, set originals (more than 2
sheets) on RADF, and press the START but-
ton.
For the machine with platen cover, scan origi-
nals (more than 2 sheets) with [Store] key.
6. Check the paper center and stapling position.
• Standard value: ± 1 mm
7. When the value is not within the standard,
press the C button while pressing the P button.
8. "Stitch and Fold stopper adj. screen"
Press the [NEXT ADJUSTMENT] or [PREVI-
OUS ADJUSTMENT] key to select a desired
paper size.
9. Enter a numeric value through the numeric
keys and press the [SET] key.
• Setting range: -128 to +127, 1 step = 0.1 mm
10. Repeat steps 4 to 9 until the standard value is
obtained.
11. Press the [PREVIOUS SCREEN] key to return
to the "Finisher adjustment mode menu
screen."
7.8.2 Fold stopper adjustment (FS-215/FN-9/FS-
606 only)
Adjusting the fold position when stitch and fold or
folding mode.
A. Procedure
1. Enter the 36 mode.
2. "36 mode menu screen"
Press the [7. Finisher adjustment] key.
3. "Finisher adjustment mode menu screen"
Press the [2. Fold stopper adjustment] key.
4. "Fold stopper adjustment (A3) screen"
Press the [COPY SCREEN] key.
5. Set paper in the tray, set originals on RADF,
and press the START button.
6. Check the paper center and folding position.
• Standard value: ± 1 mm
7. When the value is not within the standard,
press the C button while pressing the P button.
8. "Fold stopper adjustment screen"
Press the [NEXT ADJUSTMENT] or [PREVI-
OUS ADJUSTMENT] key to select a desired
paper size.
9. Enter a numeric value through the numeric
keys and press the [SET] key.
• Setting range: -128 to +127, 1 step = 0.1 mm
10. Repeat steps 4 to 9 until the standard value is
obtained.
11. Press the [PREVIOUS SCREEN] key to return
to the "Finisher adjustment mode menu
screen."
1-107
36 MODE
2