Table of Contents
Advertisement
MAIL REMOTE NOTIFICATION SYSTEM
Administrator E-Mail address
Announce delay time in reply mail *4 Select whether to contain the time difference from CE`s transmis-
Enable POP (IMAP) before SMTP
*1
Consult system administrator and create mail account for copier on receiving mail server.
*2
No echo back from the password.
*3
Use it as identifier, when managing multiple copiers.
*4
Use it to check the copier. is turned ON or not. If the time of the copier or the mail application software
is not set correctly (including time difference), wrong time is described. In that case, select [No].
3. Click "Apply" to finish input.
4. Test mail sending and receiving.
Click [Sending and receiving test] button and then sending and receiving tests are performed by one
transaction. It checks whether the sent mail is correctly received. Click [Sending and receiving test]
to display result of the test. If it is failed, please re-confirm the setting following to error message.
Sending mail test
Receiving mail test
5. Turn OFF/ON power switch of copier.
KONICA MINOLTA 8050/CF5001/C500/8150 Field Service Ver.3.0 Dec. 2004
Input address for the transfer if above [Only illegal mail] or [all
mails] is selected.
sion and copier reception on the mail.
Default is [No].
Select whether SMTP server transmits the mail after POP (IMAP)
server attests.
Default is [Yes].
Mail sending test is performed to SMTP server.
Test mail is sent to [E-Mail Address of the copy machine] set on
Step2.
Receiving test from receiving mail server is performed.
Test mail is received by [E-Mail Address of the copy machine] set
on Step2.
2-38
Advertisement
Table of Contents
