Table of Contents
Advertisement
KONICA MINOLTA 8050/CF5001/C500/8150 Field Service Ver.3.0 Dec. 2004
6. Pull the moving section of SD100 (paper feed
solenoid) [1] and measure the distance between
the paper feed roller [2] and the upper surface of
the up/down plate [3] to check whether it is
within the standard value.
Standard value: 0.5 to 2.5 mm
Perform the following adjustment if it is not
within the standard value.
7. Loosen a screw [4].
Note:
• Before starting the operation, note the origi-
nal position of the solenoid.
8. Move the paper feed solenoid (SD100) [1] hori-
zontally to make the distance between the
paper feed roller and the upper surface of the
up/down plate to be within the standard value.
9. Tighten the screw [4] for the paper feed sole-
noid.
1-189
OTHER ADJUSTMENTS
[1]
[2]
[3]
[4]
8050fs1074
Advertisement
Table of Contents
