Table of Contents
Advertisement
Description of the ISW
KONICA MINOLTA 8050/CF5001/C500/8150 Field Service Ver.3.0 Dec. 2004
B. HELP + CHECK mode
The HELP + CHECK mode is started when the sub
power switch (SW2) is pressed while pressing
"HELP" and "CHECK button." This mode is
designed specifically for ISW to be started when the
overall control program is installed but the operation
board control program is not installed because the
25 mode cannot be started in such case.
C. 25 mode
The 25 mode is available only if both the overall
control program and the operation board control
program are installed.
2-2
1
Advertisement
Table of Contents
