DRAFT
4. PERIODICAL MAINTENANCE PROCEDURE
4.4.2
Replacing the tray2 feed roller
A. Periodically replaced parts/cycle
• Tray2 feed roller: Every 300,000 counts
B. Procedure
1. Remove the tray2.
See P.55
[3]
[2]
[2]
24
[1]
A121F2C002DA
[1]
A121F2C003DA
[1]
A0VDF2C546DA
Field Service Ver. 1.0 Feb. 2010
2. Lock the media lift metal plate [1].
3. Remove two E-rings [2] and the
bearing [3].
4. Remove the C-ring [1], and remove
the tray2 feed roller [2].
5. To reinstall, reverse the order of
removal.
NOTE
• When reinstalling the feed roller [1],
make sure that it is mounted in the
direction shown in the illustration
on the left.