Developing Motor (M1); Main Motor (M2); Color Pc Drum Motor (M4) - Konica Minolta bizhub C35 Service Manual

DRAFT
Field Service Ver. 1.0 Feb. 2010
7.4.20

Developing motor (M1)

1. Remove the high voltage unit.
See P.66
[3]
[2]
7.4.21

Main motor (M2)

1. Remove the high voltage unit.
See P.66
2. Remove the rear right cover.
See P.45
[1]
[3]
7.4.22

Color PC drum motor (M4)

1. Remove the high voltage unit.
See P.66
[3]
[1] [2]
2. Disconnect the connector [1].
[1]
3. Remove four screws [2], and remove
NOTE
• When installing the motor, try to
insert it straight, and take care not
to damage the gears.
4. To reinstall, reverse the order of
A121F2C043DA
3. Disconnect the connector [1].
4. Remove four screws [2], and remove
NOTE
• When installing the motor, try to
insert it straight, and take care not
to damage the gears.
5. To reinstall, reverse the order of
[2]
A121F2C044DA
2. Disconnect the connector [1].
3. Remove four screws [2], and remove
NOTE
• When installing the motor, try to
insert it straight, and take care not
to damage the gears.
4. To reinstall, reverse the order of
A121F2C045DA
7. OTHER MAINTENANCE ITEM
the developing motor [3].
removal.
the main motor [3].
removal.
the color PC drum motor [3].
removal.
71