Ram Clear - Konica Minolta bizhub C35 Service Manual

DRAFT
Field Service Ver. 1.0 Feb. 2010
B. Switches Settings
(1) Use
• To change the CS Remote Care settings.
• The items which can be set are as follows.
Retry Settings
SC Error [SC]
Parts Life [TP]
Toner Rep. [TN]
Waste Full [T0]
Paper Jam Threshold.
Originals Jam Threshold
Paper Jam Warning
Jam History
C. Periodic Trans.
(1) Use
• Set the schedule of periodic transmission to the center.
• Select the notification interval from [Daily], [Weekly], or [Monthly].
When selecting [Daily] for the notification interval, set the [Time].
When selecting [Weekly] for the notification interval, set the [Time] and [Day of the
Week].
When selecting [Monthly], set the [Time] and [Date].
D. Fixed Date Trans.
(1) Use
• Set the schedule of fixed date transmission to the center.
• Set the transmission date and transmission time in [Fixed Date] and [Fixed Time] respec-
tively.
E. Report Settings
(1) Use
• Select the items of report data that will be sent to the center.
• The items of report data which can be set are as follows.
Sales Count/Error Count/Service Count/Life Count/System Data/History Data/
Adjustment Data/Coverage Data

10.13.12 RAM Clear

A. Use
• To reset the every setting data for CS Remote Care to the default settings.
• To be used for setting CS Remote Care.
NOTE
• If RAM clear is selected during transmission, RAM clear processing will be imple-
mented at the time the transmission is completed regardless of whether it is done
properly or not.
Retry Count
• Retransmission times on http communication error
Retry Interval
• Retransmission interval on http communication error
10. SERVICE MODE
167