Misfeed At Tray 2 Paper Feed Section - Konica Minolta bizhub C35 Service Manual

DRAFT
12. JAM DISPLAY
12.3.5

Misfeed at tray 2 paper feed section

A. Detection timing
Type
Detection of • The paper does not unblock the registration sensor (PS5) even after the lapse
misfeed at tray 2
paper feed section
B. Action
Registration sensor (PS5)
Tray2 media feed clutch (CL1)
Step
1 Initial check items
2 Check the connector between M2-PRCB
PJ6 for proper connection and correct as
necessary.
3 Check the M2 connector for proper drive
coupling and correct as necessary.
4 Check the connector between PS5-PRCB
PJ27 for proper connection and correct as
necessary.
5 Check the connector between CL1-PRCB
PJ11 for proper connection and correct as
necessary.
6 PS5 sensor check
7 CL1 operation check
8 M2 operation check
9 Change PRCB.
194
of a given period of time after the tray2 media feed clutch (CL1) is turned ON.
Relevant electrical parts
Action
Field Service Ver. 1.0 Feb. 2010
Description
Printer control board (PRCB)
Main motor (M2)
WIRING DIAGRAM
Control signal
-
-
-
-
-
PRCB PJ27-7 (ON)
PRCB PJ11-2 (REM)
PRCB PJ6-3 to 6
-
Location (electri-
cal component)
-
-
-
-
-
E-15
J-15
C-15
-