C060: Firmware Update Error; C072: Counter Not Installed; C080: Memory Error - Konica Minolta bizhub C35 Service Manual

DRAFT
Field Service Ver. 1.0 Feb. 2010
14.4.39

C060: Firmware update error

MFP board (MFPB)
Step
1 Reboot the main body.
2 Check the cable that has been used for
update of the firmware for proper connec-
tion and correct as necessary.
3 Check the firmware update file and if the
file is not the correct one, update the firm-
ware again.
4 Check the firmware update procedure and
if the procedure is not correct, update the
firmware again.
5 Update the firmware again.
6 Check the MFPB connector for proper con-
nection and correct as necessary.
7 Change MFPB.
14.4.40

C072: Counter not installed

Total counter (TCT)
Step
1 Reboot the main body.
2 Check the connector between TCT-PRCB
PJ13 for proper connection and correct as
necessary.
3 Change PRCB.
14.4.41

C080: Memory error

MFP board (MFPB)
Step
1 Reboot the main body.
2 Change MFPB.
Relevant electrical parts
Action
Relevant electrical parts
Action
Relevant electrical parts
Action
14. MALFUNCTION CODE
WIRING DIAGRAM
Control signal
-
-
-
-
-
-
-
Printer control board (PRCB)
WIRING DIAGRAM
Control signal
-
-
-
WIRING DIAGRAM
Control signal
-
-
Location (electri-
cal component)
-
-
-
-
-
-
-
Location (electri-
cal component)
-
-
-
Location (electri-
cal component)
-
-
219