Replacing The Tray2 Feed Roller - Konica Minolta bizhub C25 Service Manual

Field Service Ver. 1.1 May 2011
4.4.2

Replacing the tray2 feed roller

A. Periodically replaced parts/cycle
• Tray2 feed roller: Every 300,000 counts
B. Procedure
1. Remove the tray2.
[3]
[2]
5. To reinstall, reverse the order of removal.
4. PERIODICAL MAINTENANCE PROCEDURE
2. Lock the media lift metal plate [1].
[1]
3. Remove two E-rings [2] and the
A0VDF2C006DA
4. Remove the C-ring [1], and remove
[2]
[1]
A0VDF2C007DA
NOTE
• When reinstalling the feed roller [1],
[1]
A0VDF2C546DA
bushing [3].
the tray2 feed roller [2].
make sure that it is mounted in the
direction shown in the illustration
on the left.
23