DRAFT
7. OTHER MAINTENANCE ITEM
7.4.14
MFP board (MFPB)
NOTE
• When replacing the MFP board, in order to make the existing counter data become
available in the new board, be sure to back up the counter data following the
replacement procedure below.
A. Replacement procedure
1. Remove the rear cover.
See P.44
2. Remove the left cover.
See P.45
3. Remove the hard disk.
See P.55
4. Remove the FAX board.
See P.57
[1]
[2]
[4]
58
5. Disconnect the connector [1].
[3]
6. Remove the screw [2] and two tabs
[3], and remove the harness guide
[4].
A121F2C025
Field Service Ver. 1.0 Feb. 2010