Starting/Exiting; Starting Procedure - Konica Minolta bizhub C35 Service Manual

DRAFT
Field Service Ver. 1.0 Feb. 2010

10.2 Starting/Exiting

10.2.1

Starting procedure

NOTE
• Ensure appropriate security for Service Mode function setting procedures. They
should NEVER be shown to any unauthorized person not involved with service
jobs.
A. Procedure
1. Press the Utility/Counter key.
2. Touch [Meter Count] on meter count display.
3. Press the following keys in this order.; Stop
4. Touch [Password], and enter the CE password using the display keyboard or the 10-key
pad.
NOTE
• The initial setting for CE password is "92729272."
• Access attempts to the Service Mode with a CE password is limited to up to 3
times.
If the number of invalid access attempts reaches three, your access is locked.
Until access lock is released, the Service Mode is not accessible.
To release access lock, turning OFF/ON the power switch and rebooting the
machine is necessary.
(When the machine is rebooted, the invalid access attempts count is cleared.)
• The service code entered is displayed as "
5. The Service Mode menu will appear.
NOTE
• Be sure to change the CE password from its default value.
• For the procedure to change the CE password, see the [CE Password].
See P.172
B. Exiting procedure
• Touch the [Close].
10. SERVICE MODE
→ → → → →
0 0 Stop 0
✽
."
1
A121F3E501DA
121