Konica Minolta bizhub C35 Service Manual page 58

DRAFT
Field Service Ver. 1.0 Feb. 2010
14. To reinstall, reverse the order of removal.
15. Turn ON the power switch.
NOTE
• Make sure that the USB cable, (the network cable, and the fax cable) are not con-
nected to the machine.
16. From the Menu, select [Service Mode] → [Supplies] → [Consumables Replace] →
[Transfer Belt Unit] and execute this function to reset the transfer belt unit counter value.
17. From the Menu, select [Admin Setting] → [Printer Setting] → [Quality Settings] → [Gra-
dation Adjust] → [AIDC Process] and execute this function.
18. Connect the USB cable, (the network cable, and the fax cable) to the machine.
4. PERIODICAL MAINTENANCE PROCEDURE
19