DRAFT
Field Service Ver. 1.0 Feb. 2010
10.9 Print Menu
10.9.1
Mgmt. List
A. Use
• Prints the management information of the machine.
• To check the maintenance information. The items which can be checked are as follows.
Device Caution Information : Caution information, Process caution information
Count (total)
Coverage (total)
Replace count (total)
Imaging Unit Information
Toner Cartridge Information : Information concerning the toner cartridge
B. Procedure
1. Call the Service Mode to the display.
2. Touch [Print Menu]
3. Select [Print], and touch [OK].
C. Process Caution Information
(1) List of the process caution information
BIT
Item
⎯
0
⎯
1
⎯
2
3
Temperature/ humidity
sensor failure
⎯
4
5
IDC Sensor failure
⎯
6
⎯
7
⎯
8
⎯
9
⎯
10
11
Color Shift Test Pattern
failure
: Counter value for each color
: Coverage rate for each color
: Number of times IU, TC, transfer belt, transfer roller, and
fuser unit have been replaced.
: Information concerning the imaging unit
→
[Mgmt. List].
1 • No response is provided from the temperature/ humidity sen-
sor.
0 • Power switch OFF/ON, and normal image stabilization are
complete besides the ones listed above.
1 • IDC sensor output values are out of the specified range.
0 • Right door or front cover open/close, power switch OFF/ON,
and normal image stabilization are complete besides the
ones listed above.
1 • The number of points detected in the main scan direction is
more or less than the specified value during main scan direc-
tion registration correction.
• The number of points detected in the sub scan direction is
more or less than the specified value during sub scan direc-
tion registration correction.
0 • Right door or front cover open/close, power switch OFF/ON,
and normal image stabilization are complete besides the
ones listed above.
10. SERVICE MODE
Status
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
153