Konica Minolta bizhub C35 Service Manual page 145

DRAFT
9. Utility
NOTE
• The total counters and the print counters count at a different timing, when a sheet
of media is properly ejected and when a sheet of media is fed, respectively.
Therefore, the sum of each total counter value may not be same with the sum of
each print counter value if a sheet of media cannot be ejected due to media jam
inside the machine or other possible problems.
D. How to read consumable/periodic replacement parts (units) counter information.
• The lower left part of the statistics page (
that represent consumable/periodic replacement parts (units) counter information.
The table below explains counter information that is provided by each numerical data.
<Display on the statistics page>
0/0/0/0/0/0/0/0/0/0/0/0/0/0/0/0/0/0/0/0/0/0/0/0/0/0/0/0/0/0
<Meaning of counter value> (From the left of the numerical values)
No.
1 Number of times a high-capacity toner cartridge (K) has been replaced
Number of times a standard-capacity toner cartridge (K) has been replaced
2
* This item is not available in this machine.
3 Number of times a toner cartridge (K) made by companies other than KMBT has been replaced
4 Number of times a high-capacity toner cartridge (C) has been replaced
Number of times a standard-capacity toner cartridge (C) has been replaced
5
* This item is not available in this machine.
6 Number of times a toner cartridge (C) made by companies other than KMBT has been replaced
7 Number of times a high-capacity toner cartridge (M) has been replaced
Number of times a standard-capacity toner cartridge (M) has been replaced
8
* This item is not available in this machine.
9 Number of times a toner cartridge (M) made by companies other than KMBT has been replaced
10 Number of times a high-capacity toner cartridge (Y) has been replaced
Number of times a standard-capacity toner cartridge (Y) has been replaced
11
* This item is not available in this machine.
12 Number of times a toner cartridge (Y) made by companies other than KMBT has been replaced.
Use of toner cartridge (K) made by companies other than KMBT is set at "1."
13
(The default value is 0.)
Use of toner cartridge (C) made by companies other than KMBT is set at "1."
14
(The default value is 0.)
Use of toner cartridge (M) made by companies other than KMBT is set at "1."
15
(The default value is 0.)
Use of toner cartridge (Y) made by companies other than KMBT is set at "1."
16
(The default value is 0.)
17 Use of toner refill cartridge (K) is set at "1." (The default value is 0.)
18 Use of toner refill cartridge (C) is set at "1." (The default value is 0.)
19 Use of toner refill cartridge (M) is set at "1." (The default value is 0.)
20 Use of toner refill cartridge (Y) is set at "1." (The default value is 0.)
21 Rate of transfer roller use (%)
22 Number of times a transfer roller has been replaced
106
Field Service Ver. 1.0 Feb. 2010
in the sample page) shows numerical values
Contents
9L25