Solid Black - Lexmark X95x Series Service Manual

7558-xxx

Solid black

Check the media path for foreign objects such as staples, clips, scraps of media.
Step
Check the four PC cartridges for proper installation.
1
Check the PC cartridge connections.
Are the PC cartridge connections free of excess
wear and contamination?
Check the charge roll HVPS card PCBA connections.
2
Is the above component properly connected?
Replace the charge roll HVPS card PCBA. Go to
3
"Charge roll HVPS PCBA removal" on page
Perform a print test.
Does the problem remain?
Check the upper printer engine PCBA for proper
4
connectivity. Disconnect and reconnect all appropriate
cables.
Replace the upper printer engine PCBA.
Go to
page 4-189.
Perform a print test.
Does the problem remain?
Service Manual
2-280
Check
"Upper printer engine PCBA removal" on
Yes
Go to step 2.
Go to step 3
Go to step 4.
4-40.
Replace the RIP
card PCBA.
Go to
"RIP
PCBA removal"
on page 4-153.
Previous
Go Back
No
Correct and
clean
contaminated
pins, or replace
the appropriate
PC cartridge or
connector.
Replace the
connection.
Problem
resolved
Problem
resolved
Next