Communication Error With Booklet Controller Card Assembly - Lexmark X95x Series Service Manual

7558-xxx
Step Action and questions
Check the sensor (booklet
4
compiler media entrance) for
proper operation.
1. Enter the Diagnostics Menu.
2. Touch SENSOR TESTS.
3. Touch FINISHER SENSOR
TESTS.
4. Touch Sensor (booklet
compiler media present).
Does the display on the
operator panel change every
time the sensing area of the
above sensor is interrupted or
blocked?
5 Is the sensor (booklet compiler
media entrance) properly
connected?
Perform a POR.
6
Does the error continue when
the power is turned off/on?
Perform a POR.
7
Does the error continue when
the power is turned off/on?

381.41 Communication error with booklet controller card assembly

Step Action and questions
Check the booklet controller card
1
assembly and the finisher
controller card assembly for
proper connection.
Is the above component
properly connected?
Perform a POR.
2
Does the error continue when
the power is turned off/on?
Perform a POR.
3
Does the error continue when
the power is turned off/on?
Service Manual
2-216
Yes
Go to step 6.
Replace the sensor (booklet
compiler media entrance). Go to
"Sensor (booklet compiler
media entrance) removal" on
page 4-385.
Replace the booklet controller
card assembly. Go to
"Booklet
controller card assembly
removal" on page 4-325.
Replace the finisher controller
PCBA. Go to
"Finisher PCBA
removal" on page 4-356.
Yes
Go to step 2.
Replace the booklet controller
card assembly. Go to
"Booklet
controller card assembly
removal" on page 4-325.
Replace the finisher controller
PCBA. Go to
"Finisher PCBA
removal" on page 4-356.
No
Go to step 5.
Replace the connection.
Problem resolved
Problem resolved
No
Replace the connection.
Problem resolved
Problem resolved
Previous
Next
Go Back