Sensor (Booklet Media Exit) Lag Jam - Lexmark X95x Series Service Manual

7558-xxx
Step Action and questions
POR the machine.
8
Does the error continue?

493.05 Sensor (booklet media exit) lag jam

Step Action and questions
Check the sensor (booklet media
1
exit) for proper operation.
1. Enter the Diagnostics Menu.
2. Touch SENSOR TESTS.
3. Touch FINISHER SENSOR
TESTS.
4. Touch Sensor (booklet
media exit).
Does the display on the
operator panel change every
time the sensing area of the
above sensor is interrupted or
blocked?
Check the sensor (booklet media
2
exit) for proper connection.
Is the above component
properly connected?
Check the booklet folding/exit
3
motor for proper operation.
When performing
motor tests, ensure
that all cover and
door interlock
switches are
overridden.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch FINISHER MOTOR
TESTS.
4. Touch Booklet folding/exit
motor (forward).
5. Touch Booklet folding/exit
motor (reverse).
Does the above component
operate properly?
Check the booklet folding/exit
4
motor for proper connection.
Is the above component
properly connected?
Service Manual
2-246
Yes
Replace the finisher controller
PCBA.
Go to
"Finisher PCBA removal"
on page 4-356.
Yes
Go to step 3.
Replace the sensor (booklet
media exit)
Go to
"Sensor (booklet unit
media exit) removal" on
page 4-391.
Go to step 5.
Replace the booklet folding/exit
motor.
Go to
"Booklet folding/exit
drive motor assembly removal"
on page 4-329.
No
Problem resolved
No
Go to step 2.
Replace connections.
Go to step 4.
Replace connections.
Previous
Next
Go Back