Image Pipeline Asic Failure - Lexmark X95x Series Service Manual

Step Action and questions
Check the booklet fold solenoid
5
for proper operation.
When performing
motor tests, ensure
that all cover and
door interlock
switches are
overridden.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch FINISHER MOTOR
TESTS.
4. Touch Booklet knife
solenoid.
Does the above component
operate properly?
Check the booklet fold solenoid
6
for proper connection.
Is the above component
properly connected?
Check the booklet controller card
7
assembly for proper connection.
Is the above component
properly connected?
Check the finisher controller
8
PCBA for proper connection.
Is the above component
properly connected?
POR the machine.
9
Does the error continue?

841.00 Image pipeline ASIC failure

Step Action and questions
Perform a POR.
1
Does the error occur when the
power is turned off/on?
Turn the printer off for 60
2
seconds.
Does the error occur when the
power is turned off/on again?
Yes
Go to step 7.
Replace the booklet fold
solenoid. Go to
"Booklet fold
solenoid removal" on
page 4-328.
Replace the booklet controller
card assembly).
Go to
"Booklet controller card
assembly removal" on
page 4-325.
If the error remains, then go to
step 8.
Go to step 9.
Replace the finisher controller
PCBA.
Go to
"Finisher PCBA removal"
on page 4-356.
Yes
Go to step 2.
Replace the RIP card assembly.
Go to
"RIP PCBA removal" on
page 4-153.
7558-xxx
No
Go to step 6.
Replace the connection.
Replace the connections.
Replace the connections.
Problem resolved
No
Perform several print tests.
If the problem remains, then go to
step 2.
Problem resolved
Diagnostic information
Previous
Next
Go Back
2-247